To set up the system, follow these steps:
Setting up system
Insert one end of the audio input cable into the Acoustimass® module jack on the control console
Insert the other end of the audio input cable into the Media Centre jack on the Acoustimass® module
Insert the RCA plug of each speaker cable into the five speakers jacks on the Acoustimass® module
Insert an HDMI® cable into an HDMI jack on the rear of the television
Insert the other end of the HDMI® cable into the HDMI OUT Video to TV jack on the control console
Connect the power cable to the AC Power jack on the Acoustimass® module and to a power outlet
Connect the cable attached to the power supply to the Power jack on the control console
Connect one end of the 3-pin plug to the power supply and the other end to a power outlet
Note: The use of an "HDMI-to-DVI" cable is acceptable for monitors that do not have an HDMI® input. Use of "HDMI-to-DVI" adapters or switches is not supported.
For speaker placement suggestions, see Speaker placement.