90-day risk free trial, 2-years warranty and free standard delivery for orders above €45

Remote does not work

If the soundbar is not responding to power, volume and source selection commands from the remote provided with it, try the following:

Operate the remote within 6 metres (20 feet) of the soundbar, as this is its maximum operating range.

If the six source icons on the remote are blinking, the remote is not associated with the soundbar.

To re-associate the remote with the soundbar:

  1. On the remote, press and hold the Volume Down and Left Navigation buttons for five seconds to clear the remote’s pairing list
  2. Press the Centre Navigation button once to put the remote into pairing mode
  3. Open the Bose Music app and tap on the image of the soundbar shown in the bottom-right corner
  4. Select Settings > Pair New Remote
  5. Follow the instructions in the app
  6. Once the remote is found, tap Continue to complete the pairing process

To configure this remote to operate other devices, refer to Programming the universal remote

Install a set of new batteries in the remote. If you've recently replaced the batteries, make sure that the positions of the + and - symbols on the batteries match the + and - markings inside the battery compartment.

Installing the batteries

Reset the soundbar by unplugging its power cable from the power socket, waiting 30 seconds and then firmly plugging the power cable back into a working socket.

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided