90-day risk free trial, 2-years warranty and free standard delivery for orders above €45

Setting up your system

To set up the system, follow these steps:

  • On the audio input cable, insert the RCA plugs into the ZONE 1 jacks on the music center
  • Insert the 1/8" (3.5 mm) plug into the SERIAL DATA OUTPUT jack on the music center
  • On the opposite end of the audio input cable, insert the 5 pin plug into the AUDIO INPUT jack on the Acoustimass module
  • On one end of the speaker wires, insert the bare wires into the positive and negative terminals on each speaker cube
  • Insert the other end of the speaker wires into the speaker terminals labelled Outputs to Cube Speakers on the Acoustimass module
  • Connect the power cord for both the Acoustimass module and the music center to a working power outlet

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided