on the audio input cable, insert the rca plugs into the fixed output jacks on the music center
insert the 1/8" (3.5 mm) plug into the system control 1 jack
on the opposite end of the audio input cable, insert the 8-pin plug into the audio input jack on the acoustimass module
Match the correct speaker cable to the corresponding speaker location:
- Front speaker cables have blue plugs at one end, with L, R and C molded into the plug housing. The red collars on the positive wire are labeled LEFT, RIGHT and CENTER
- Surround speaker cables have orange plugs at one end, with L and R molded into the plug housing. The red collars on the positive wire are labeled LEFT and RIGHT.
Connect each speaker, matching the red wire (positive) to the red terminal and the black wire (negative) to the black terminal. Make sure to insert only the bare wire into the terminal hole and not the wire casing; this will ensure a proper connection
match the correct speaker cable to the corresponding speaker location (out to cube speakers) on the acoustimass module
- Insert the blue plugs into the matching left front, center and right front jacks
- Insert the orange plugs into the matching left surround and right surround jacks
plug the power cord into the ac power jack on the acoustimass module, and to a power outlet
plug the power supply into the ac power jack on the music center, and to a power outlet