90-day risk free trial, 2-years warranty and free standard delivery for orders above €45

Using the TV sensor

To use the TV sensor, follow these steps:

Connect the TV sensor to the TV Sensor jack on the media console connection panel. (On the panel, the TV Sensor jack is immediately above two other jacks of the same type: the IR Emitter and Serial Data jacks)

Turn the TV on and select the correct video input

On the remote, press SYSTEM

Press the RIGHT ARROW until the "Video" icon is highlighted, and then press ENTER

Press the DOWN ARROW until "TV POWER Status" is highlighted

Move the flat side of the TV sensor slowly around the back of the TV until TV Power Status indicates: "TV On"

Attach the TV sensor to this location with the adhesive strip provided

Press the UP ARROW until "TV POWER" is highlighted, and press ENTER

Press the DOWN ARROW until "Automatic" is highlighted and press ENTER

Press EXIT to leave the system menu

Did this information help?

Great, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided