90-day risk free trial, 2-years warranty and free standard delivery for orders above €45

Lifestyle® SoundTouch® 525 entertainment system

Sold from 2015 – 2016

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

ADAPTiQ system setup and deactivation

Find out how to turn on or turn off ADAPTiQ audio calibration. ADAPTiQ optimizes the sound of your system for the acoustics of your room. The contents of your room (i.e. surfaces, furniture, rugs, etc.) impact how sound is heard in the room. The calibration process measures the properties of your room and adjusts the sound of your system accordingly. If you re-arrange your room or move your system to a different room, re-calibrate your system.

To run the ADAPTiQ audio calibration system:

Before you begin, be sure the speakers are connected placed where you want them.
  1. On the system console, press the Setup button. (Tip: If the system menu does not appear on your TV, be sure the correct TV input is selected)
  2. On the remote control, scroll down to select ADAPTiQ, then press the OK button
  3. Follow the on-screen instructions to calibrate your system

To turn off the ADAPTiQ audio calibration:

  1. On the system console, press the Setup button. (If the system menu does not appear on your TV, be sure the correct TV input is selected)
  2. On the remote, scroll down to select ADAPTiQ
  3. Scroll right to view the ADAPTiQ options
  4. Scroll down to select Enable/disable, then press the OK button
  5. When prompted to disable ADAPTiQ, select Yes, then press the OK button
  6. Press the Exit button to close the menu
Tip: Your calibration settings are disabled but not erased. They can be re-enabled at any time.
Was this article helpful?
Submit
Thank you for your feedback!