NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

ProFlight Series 2 Aviation Headset

Sold from 2019 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Product will not turn on

If your product appears to be receiving power but won't power on as expected:

Insert new alkaline batteries in the headset control module.

Try new non-rechargeable batteries. If you have an aircraft-powered headset, unplug it from the aircraft, insert batteries, then try powering on to determine if power from the aircraft is the issue. Be sure the + and – markings on the batteries match the markings in the battery compartment. (Tip: While rechargeable batteries may work, power output may not be as consistent as the recommended alkaline batteries.)

Determine if any recent changes have been made to the headset or aircraft.

If any changes or modifications have been made to either the headset or the aircraft, consider whether or not those changes could have unexpectedly caused this issue.

For aircraft-powered headsets, connect to a different panel jack or, if available, to a different aircraft.

Plug in your headset to another jack on the aircraft panel. Or, if possible, plug in your headset to another aircraft with a compatible jack to power your headset. If the headset works when connected elsewhere, the issue is related to the panel jack or wiring.

Avoid pressing the power button repeatedly when attempting to turn the headset on or off.

The headset can take up to 6 seconds to turn on or off. Each additional press of the power button will cause the headset to take longer to complete the desired action.

If your powering your headset from a 5-pin XLR connection on the aircraft, disable the Auto-On feature of your headset.

If an aircraft is powering to your headset from a 5-pin XLR jack providing less that 12 volts, your headset might power on or off unexpectedly or product static. To resolve this:
  1. Open the battery door on your headset control module
  2. If installed, remove the batteries to access the headset option switches
  3. Set the Auto-On switch to the OFF position
  4. Install or re-insert the batteries so your headset can switch between aircraft and battery power as needed.
Note: When connected to an intercom, your headset still passes all communication while powered off—just without noise cancellation.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!