NEW PRODUCTS ARE HERE! CHECK THEM OUT.
Stores Cart

Bose Sport Earbuds

Sold from 2020 – 2023

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

No audio from product

If your product seems to be set up properly but does not produce sound, try the following:

If only using one earbud, make sure to use the right earbud,

  • The right earbud is the "primary" or main earbud; it controls the left earbud by relaying audio from the source device.  If you place the right earbud in the case by itself with audio streaming and close the case, audio will stop, and the earbuds will turn off
  • The right earbud also has the microphone for phone calls. Make sure you use the right earbud for phone calls 

Reboot the Bluetooth® device.

Electronics might need to be reset on occasion to correct minor issues. This is typically done by shutting down the device, then powering it on again.

If adding a device to Windows 10, be sure to connect to the Bluetooth® device with the headset or speaker icon.

In Windows 10, your product shows up twice in the Bluetooth device list: once with a device icon and LE- before the product name and once with a headphones or speaker icon. Select the option with the headphones or speaker icon. Do not select the LE- listing.

Tip: If you already paired to the device icon, just connect your product again and choose the listing with the headphones or speaker icon. For more information, see Connecting a Bluetooth device.

Windows 10 Add a device screen

Make sure the LEDs are on before removing earbuds from the case.

When the charging case and the earbuds are fully charged, the earbuds enter sleep mode. To wake up and power on earbuds, wait for status lights to glow before removing the buds from the case.

Update your system software.

Product updates keep your system working at its best. For more info, see Updating the software or firmware of your product.

Try a different app.

If the issue only occurs with a particular app, it is likely related to the app or app settings.

Determine if the issue occurs with another Bluetooth® device.

The source device currently paired to your product may be causing the issue. Try pairing a different Bluetooth source to see if the issue is isolated to that device.

Clear your product's memory of previously paired Bluetooth® devices, then reconnect.

Your product remembers the last several devices it connected to so it can quickly reconnect to them. In case of an issue with the device memory, clear its Bluetooth pairing list, then reconnect your device. For more information, see Clearing the product memory of paired Bluetooth devices and Connecting a Bluetooth device.

Remove your product from the memory of the Bluetooth® device, then try again.

In the Bluetooth settings of the Bluetooth device, find the list of previously connected products. Remove your product from the list, then reconnect it to the device. For more info, see Connecting a Bluetooth device.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Was this article helpful?
Submit
Thank you for your feedback!