Start the party early. Discover our bestselling products. SHOP.

F1 Model 812 Flexible Array loudspeaker

Sold from 2025 – present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (e.g. connection help, no audio from headphones etc.).

Intermittent audio from product

If the sound played from your product cuts in and out, plays inconsistently or is choppy-sounding, try the following:

Be sure the system is set up properly and all connections are secure.

A connection may have come loose or may be connected incorrectly. For more info, see Setting up your product.

Plug in a different audio source.

Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.

Try a different output on the mixer or audio source.

If the audio source has more than one output (i.e. a mixer with main and aux outputs), connect to another output with the same cables to determine if the output is the issue.

Reset your system.

A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more info, see Resetting your product.

Replace the input cables.

Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.

Try a different powered speaker or sound system.

If available, connect a to different powered speaker to determine if the issue is related to the audio source or connecting cables.

Plug in to a different input on your product.

Determine if the issue is related to a particular input by connecting the audio source to a different input using the same audio source and cable(s).

Check if the system LEDs flash on and off.

The issue could actually be intermittent power. On the system, check the power and status LEDs. If they flash on and off, see Product turns on or off by itself.

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service